2
Installing Logic Analyzer Cards and Probes
16962A Logic Analyzer (1-card module)
A single- card module can be installed in any available slot.
For a single card, the two 16960- 61602 flex cables (kit 16960- 60002 in the
accessory pouch) are not used.
Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
The order of pods on the card's rear panel is:
In a multi- card set, pods are indexed from the bottom up. Because clock
signals can be input to any card in the set (on pod 1 or 3), cards do not
have master and expander designations.
30
Pod 4
Pod 3
16900 Series Logic Analysis Systems Installation Guide
page
Pod 2
Pod 1
26.