Table of Contents
Advertisement
Operation
If the storage is full
Configuring the
automatic storage
function
95
4.12.1 Manual storage
You can transmit a measurement dataset to the data storage as fol-
lows. The dataset is at the same time output to the interface:
1
Press the <STO> key shortly.
The menu for manual storage appears.
Manual data storage 4 From 500
15.03.2014 11:24:16
pH 7.000
24.8 °C AR +++
ID number:
continue
15.03.2014 08:00
2
If necessary, change and confirm the ID number (1 ... 10000)
with <><> and <MENU/ENTER>.
The dataset is stored. The meter switches to the measured
value display.
When all storage locations are occupied, it is not possible to continue
storing. Then you can e.g. transmit the stored data to a PC or a USB
flash drive (see section 4.12.3) and subsequently erase the storage
(see section 4.12.4).
4.12.2 Automatic storage at intervals
The storage interval (Interval) determines the time interval between
automatic storage processes. Each storage process transmits the cur-
rent dataset to the interface at the same time.
1
Press the <STO
The menu for automatic storage appears.
1
_
> key.
Multi 3420
ba75864y18
01/2015
Advertisement
Table of Contents
