Automatic Data Storage At Intervals - wtw pH/ION 7320P Operating Manual

pH/ION 7320
Configuring the
automatic storage
function
ba75935e04 12/2017
Warning
Data storage full. Erase?
Yes
No
Back
You have the following options:
 To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value display,
confirm No. Then you can e.g. transmit the stored data to a PC (see section
10.3.1 E
DITING THE MEASUREMENT DATA STORAGE
quently erase the data storage (see section 10.3.2 E
MENT DATA STORAGE

10.2 Automatic data storage at intervals

The storage interval (Interval) determines the time interval between automatic
data storage processes. With each data storage process, the current datasets
of the sensors indicated on the display are transmitted to the interface at the
same time.
1. Press the <STO__> key.
The menu for automatic data storage appears.
Automatic data storage
ID number
Interval
Duration
Continue
0d03h00min
0
12.12.2012
Back
1 Adjusted entire storage duration
2 Max. available storage duration
3 Graphical display of the storage usage
12.12.2012
12:12
, page 83).
1
30 s
180 min
1d17h33min
12:12
Data storage
, page 81) and subse-
RASING THE MEASURE
1
2
3
-
79