Automatic Data Storage At Intervals - wtw pH 3310 IDS Operating Manual

pH 3310 IDS
Configuring the
automatic storage
function
Settings
ba77035e01 02/2014
8.2

Automatic data storage at intervals

The storage interval (Interval) determines the time interval between automatic
data storage processes. Each data storage process transmits the current data-
set to the interface at the same time.
1. Press the <STO_> key.
The menu for automatic data storage appears.
Automatic data storage
ID number
Interval
Duration
continue
0d03h00min
0
01.02.2014
Back
1 Specified entire storage duration
2 Max. available storage duration
3 Graphical display of the memory usage
You can configure the automatic data storage function with the following set-
tings:
Menu item Possible setting
ID number 1 ... 10000
Interval 1 s, 5 s, 10 s,
30 s, 1 min,
5 min, 10 min,
15 min, 30 min,
60 min
Duration 1 min ... x min
1
30 s
180 min
1d17h33min
08:00
Explanation
ID number for the dataset series.
Storage interval.
The lower limit of the storage interval
can be restricted by the number of free
memory locations.
The upper limit is restricted by the stor-
age duration.
Storage duration.
Specifies after which time the auto-
matic data storage should be termi-
nated.
The lower limit of the storage duration
is restricted by the storage interval.
The upper limit is restricted by the
number of free memory locations.
Data memory
1
2
3
51