Automatic Storage At Intervals - wtw Avantor VWR pH 1100 L Operating Manual

pH 1100 L
If the memory is full
Configuring the
automatic storage
function
Settings
ba77068d05 05/2021
The following window appears if all 200 storage locations are occupied:
Warning
Data storage full. Erase?
Yes
No
15.03.2014
Back
08:00
You have the following options:
 To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value
display, confirm No. Then you can e.g. store the data from the mem-
ory to a PC (see section 5.5.3) and subsequently erase the memory
(see section 5.5.4).

5.5.2 Automatic storage at intervals

The storage interval (Interval) determines the time interval between
automatic data storage processes. Each data storage process trans-
mits the current dataset to the interface at the same time.
<STR
1 Press the
The menu for automatic data storage appears.
Automatic data storage
ID number
Interval
Duration
Continue
0d03h00min
0
15.03.2014
Back
08:00
You can configure the automatic data storage function with the follow-
ing settings:
_
>
key.
Adjusted entire storage
1
duration
30 s
180 min
Max. available storage
duration
1d17h33min
Graphical display of the
memory usage
Operation
47