Upgrading Main Software; Steps To Install An Upgrade Package - Christie CP4230 Service Manual

Section 3: Service Setups
3.7

Upgrading Main Software

The Upgrade window begins a series of steps to walk you through the upgrade process. You must login as an
Admin level or higher to use the upgrade feature. The left column of the Upgrade window shows which state
you're currently at in the upgrade process. Tap the Next/Prev buttons to navigate the series of steps.

3.7.1 Steps to Install an Upgrade Package

1. Access the Upgrade Package using ONE of the following processes:
• Insert the USB drive containing the upgrade package into one the USB ports at the back of the TPC.
Open the back cover to reveal the USB ports. Navigate to the Administrator Setup: Marriage window
and tap the Upload button. (Figure 3-16). This launches a file selection dialog for you to navigate and
select this file. Once complete, the system automatically advances to the Extraction window and begins
extracting the upgrade package.
• From an FTP client, enter the projector IP address and enter the user name (ftpuser) and password (cds-
ftp). Once connected, copy the upgrade package from the FTP site to the root folder of the projector. The
upgrade package should display in the Available Upgrade Files region of the File Selection window.
(Figure 3-16). Select the upgrade package and tap the Next button to advance to the Extraction win-
dow.
2. The Extraction window shows the progress of extracting, decrypting, and verifying the files. On any
failure, the upgrade process will display an error dialog and then bring you back to the File Selection
window. On successful extraction of the package, the upgrade process will automatically advance to the
Package Details window. Once the extraction is complete, you can remove the USB drive.
3. The Package Details window shows the versions of all components installed in the projector. (Figure 3-
17). Select the type of install to perform: Upgrade Different Packages Only, Force Upgrade All, or
Factory Defaults Install and tap the Next button to advance to the Installation window.
4. The Installation window displays the state of the upgrade progress. (Figure 3-18). On successful
completion or failure of the installation, a dialog will display indicating the state of the upgrade. Tap the
OK button. At this point, the TPC will reboot in order to install the TPC user interface software. The TPC
will shut down, reboot, and display an install progress window as the user interface is installed. Once
complete, tap the Finish button to return to the Main panel.
3-16 CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)