Backup, Restore, And Upgrade Projector Files; Upgrading The Projector Software; Exporting Backup Settings To An External Device - Christie Boxer 4K30 User Manual

Backup, Restore, and
Upgrade Projector Files
This section provides information and procedures for backing up, restoring, and upgrading projector
files.

Upgrading the projector software

1. Turn off the lamps before proceeding with the upgrade.
2. Insert a USB key that contains the software upgrade file.
If two USB flash drives are inserted, the first flash drive inserted is the one recognized for the
upgrade. The USB flash drive must be formatted using the FAT 32 file system.
The upgrade file must be located at the root of the USB key.
3. From the home page, select MENU > Admin.
4. Select Software > Upgrade.
5. Select an upgrade file and select Enter.
6. To automatically restart the projector, select Restart Now.
If you decide restart the projector at a later date (Restart Later), you cannot perform another
upgrade until the projector is restarted.

Exporting backup settings to an external device

1. Insert a USB flash drive (properly formatted as FAT) into the USB port on the projector.
2. Select MENU > Admin > Backup & Restore.
3. Select Backup to USB.
A default name is assigned.
4. To edit the backup file name, select the up arrow and select Enter.
5. To save the name, navigate down and select SAVE.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
26