Edid Upgrade; Setup Procedure (Vga&Hdmi) - Christie Captiva DHD400S Service Manual

EDID Upgrade

The EDID upgrade procedure for DUW350S is the same as DHD400S, DHD400S is used as
the example.
Software
Hardware
Setup Procedure (VGA&HDMI)
1. Connect P1 of fixture with COM Port of PC/Laptop by RS232 cable.
2. Connect P2&P4 of fixture with VGA-in port of projector by VGA cable.
3. Connect P3 of the fixture with HDMI1 port of projector by HDMI(M) to DVI(F) cable.
Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)
Equipment Needed
• EDID Program (All models_EDID Tool_Ver.0.81)
• EDID File (*.ini)
• Projector
• VGA Cable (42.87305G102)
• HDMI(M) to DVI(F) cable (42.00256G001)
• Power Adapter (Output DC 12V)
• Power Cord for Projector (42.53506G002)
• RS-232 9 Pin Cable (pin to pin, F-M) (42.83C07G001)
• Generic Fixture (80.00001G001) for EDID Key-in (Fixture: JP3 must be closed)
• PC or Laptop with Windows 32bits
Firmware
18