[Hdmi Setup]; [Logo] - Christie LX1750 User Manual

■ To register adjusted content you z
have changed
Registers values after adjustment.
1) Press ▲▼ to select [Store].
2) Press the <SELECT> button.
3) Select [Yes], and press the <SELECT>
button.
■ To display the test pattern z
1) Press ▲▼ to select [Test pattern].
2) Press the <SELECT> button.
z
z Displays the test pattern selection screen.
3) Press ▲▼ to select the test pattern to
be displayed, and press the <SELECT>
button.
z
z The selection screen is cleared and the test
pattern is displayed.
z
z Press any button to return to the setting screen.
z Press ▲▼ to select [Back], and press the z
<SELECT> button to return to the setting
screen of [Advanced color matching].
[Measured] [Red]/[Green]/[Blue]
[Red]/[Green]/[Blue]/[Cyan]/
[Target]
[Magenta]/[Yellow]/[White]
■ To return to the sub menu z
Returns the projector to the sub menu.
1) Press ▲▼ to select [Back].
2) Press the <SELECT> button.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)

[HDMI setup]

If the image cannot be correctly displayed when an
external device is connected to the projector using
HDMI, change the settings.
1) Press ▲▼ to select [HDMI setup].
2) Press the <SELECT> button.
z ▲▼ are displayed over the sub menu. z
3) Press ▲▼ to switch the setting.
[Normal]
Select when the output from the
[Normal]
external device is "NORMAL
Select when the output from the
[Enhanced]
external device is "ENHANCED
*1: The titles of the output settings differ depending on the
device. For details, refer to the user manual of the external
device.

[Logo]

Sets logo selection and the PIN code for logo selection.
1) Press ▲▼ to select [Logo].
2) Press the <SELECT> button.
z
z The sub menu 2 is displayed.
3) Press ▲▼ to switch the setting.
■ [Logo select] z
1) Select [Logo select], and press the
<SELECT> button.
2) Press ▲▼ to switch the setting.
z
z The setting will change as follows each time
you press the button.
[Off] [User]
[Off] Clears logo from screen.
Displays the image you have
[User]
captured.
Displays in the factory default
[Default]
settings.
[Setting] menu
[Enhanced]
*1 ".
".
*1
[Default]
ENGLISH - 65