Canon imagePROGRAF iPF815 Service Manual page 44

Chapter 1
First Level
[Interface Setup]
[Maintenance]
1-30
Second Level
[TCP/IP](*18) [Protocol](*4)
[IP Setting](*14)
[NetWare](*18) [NetWare]
[Frame Type](*6)
[Print Service](*6)
[AppleTalk](*18) [On]
[Off]*
[Ethernet Driver](*18) [Auto Detect]
[Comm.Mode](*7)
[Ethernet Type](*7)
[Spanning Tree]
[MAC Address]
[Init. Settings](*18) [No]*
[Yes]
[Maint. cart.] [No]
[Yes]
T-1-12
Third Level Fourth Level
[BOOTP]
[RARP]
[IP Address]
[Subnet Mask]
[Default G/W]
[On]
[Off]*
[Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]*
[Off]
[Half Duplex]*
[Full Duplex]
[10 Base-T]*
[100 Base-TX]
[Not Use]*
[Use]
000085XXXXXX
Fifth Level
[On]
[Off]*
[On]
[Off]*
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255