Canon imagePROGRAF iPF815 Service Manual page 186

Chapter 4
3) Remove three screws [1] and connector [2] to remove platen suction fan unit [3].
d) Removing the platen suction duct
1) Removed the cover stay unit (R).
2) Remove two screws [1] to remove platen suction duct [2].
e) Precaution in mounting the platen suction duct
Check that platen suction duct [1] is firmly seated in hole [2] in the rear side plate.
4-36
[1]
[3]
F-4-80
[1] [2]
F-4-81
[1]
F-4-82
[1]
[2]
[2]