Adjusting the light power
Set the value of the laser diode power. The power levels can be managed to obtain the brightest
picture or longest light source life. The minimum setting of the light power is 30% brightness and color
setting, and the maximum is 100% brightness and color setting.
1. Select Menu > Light Source > Constant Power.
2. Adjust the slider by arrow keys or select ENTER to input the value you selected.
3. After inputting the value, select ENTER to apply.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring light settings
66