Enabling direct pass-through of HDMI, 3G, and
DisplayPort input signals
1. Select MENU > Configuration > Input Settings > Video Loop Out.
2. To enable passing HDMI, 3G, and DisplayPort input signals through to another projector, select
Enter.
Adjusting lamp power
1. Select MENU > Configuration > Lamp > Lamp Power.
2. Press Enter.
3. To adjust the lamp power, use the slider.
4. To confirm your selection, press Enter.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Configuring System Settings
25