Re-Connecting The Network; Adjusting The Back Light Settings; Setting The Hot Key; Configuring Date And Time - Christie Inspire Series User Manual

Re-connecting the network

After the network is disconnected and timeout via RJ-45/HDBaseT/Wifi, the browser will refresh the
page automatically and show "HTTP404 (Not Found)" error message.
If user wants to re-control the projector, user must login in the control page with account and
password again.

Adjusting the back light settings

Control the back light behavior and timeout setting for the keypad and status LED.
1. Select Menu > Configuration > Backlight Preferences > Status LED.
2. Select the appropriate setting for status LED.
3. To confirm the selection, press ENTER.

Setting the hot key

To directly call out a function without going through the layers of the on-screen display (OSD)
menus, select a specific function for a hot key. User can call this function by pressing the HOT KEY
on remote control.
1. Select Menu > Configuration > Hot-Key Settings.
2. Select the one function for the hot key:
• Size Presets
• Picture Settings
• Default Value
• Detail
• Contrast Enhancement
• Light Source Mode
• Image Freeze
• Information
• Disable Warp/Blend

Configuring date and time

Configure date and time settings.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Configuring light settings
50