Adjusting Lens Position; Saving Lens Setting; Applying The Previous Lens Setting; Locking The Lens Motor - Christie HS 2K Series User Manual

7. Use the up and down arrow keys to zoom in or out of the image.
8. To exit the menu, select EXIT.
9. To refine your adjusts, repeat steps 2 to 7.

Adjusting lens position

Shift the lens to the specific position.
1. Display an image or test pattern that can be used to analyze image location.
2. Select LENS on keypad or LENS H/LENS V on remote control.
You can also select Menu > Configuration > Lens Settings > Lens Shift.
3. Use the arrow keys to adjust the lens position.
4. To exit the menu, select EXIT.

Saving lens setting

Save the lens position. One projector can save maximum up to five lens settings.
1. Select Menu > Configuration > Lens Settings > Lens Shift Memory > Save Current
Settings.
2. To save the lens setting, select an empty record.
3. To confirm the selection, select ENTER.

Applying the previous lens setting

Apply the previously saved lens setting to the projector.
1. Before applying the previous lens setting, you need to save the lens setting.
See Saving lens setting
2. Select Menu > Configuration > Lens Settings > Lens Shift Memory > Apply Position.
3. To apply specific lens setting, select the required record.
4. To confirm the selection, select ENTER.

Locking the lens motor

Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out
any changes and overriding all other lens features. This feature prevents accidental lens position
changes in multiple projectors installations.
1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.
2. To enable locking of all lens motors, select Locked.
3. To unlock all lens motors, select Allow.
4. To confirm the selection, select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
on page 51 for further details.
Configuring system settings
51