Adjusting the light power
Set the value of the laser diode power. The power levels can be managed to obtain the brightest
picture or longest light source life. The minimum setting of the light power is 30% brightness and color
setting, and the maximum is 100% brightness and color setting.
1. Select Menu > Light Source > Constant Power.
2. Adjust the slider by arrow keys or press ENTER to input the value you selected.
3. After inputting the value, press ENTER to apply.
Calibrating the light sensor
Light brightness decays naturally over time, so use this system to maintain the correct color point.
Set the time for light calibration.
1. Select Menu > Light Source > Light Sensor Calibration.
2. Select most suited time for doing the light sensor calibration:
•
Default—Process light calibration at the cooling stage.
•
Manual—Perform light calibration manually.
3. To confirm the selection, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Configuring light settings
62