Setting The Contrast Ratio; Enabling The Image Freeze - Christie HS 2K Series User Manual

Setting the contrast ratio

Use contrast enhancement function to raise the contrast ratio.
1. Select Menu > Image Settings > Contrast Enhancement.
2. Select the appropriate calculation method for contrast ratio:
• Dynamic Black
the black levels in the projected image while electronically increasing the gain in the
image. The result is enhanced detail and increased contrast ratio of 6500:1.
• Speed—Adjusts the speed of the light source correction. The value ranges from 1 to 15.
A lower value makes the correction slower and less aggressive while a higher value
results in the faster correction.
• Strength—Sets the strength of the dynamic contrast adjustment. The value ranges from
0 to 3, the higher the value the stronger the correction.
• Level—Adjusts the light source when the brightness level of the current content gets
lower than the set value. The value ranges from 50 to 100, indicating 50% to 100% of
the constant brightness. The higher the value, the larger the range to adjust the light
source.
• Real Black—Turns off the laser light while projecting black content.
• Lights Out Timer—Sets a timer for the laser light to turn off after detecting black
content.
• Lights Out Signal Level—Sets a black level value as the threshold for the Real Black
function. The value can be selected from 0 to 5, with 0 being the darkest black and 5
being the brightest.
• Reset to Default—Resets all contract enhancement settings to the default factory
defaults.
3. To confirm the selection, select ENTER.

Enabling the image freeze

Pause the display screen despite any change in the source device.
1. Select Menu > Image Settings > Image Freeze.
2. To pause the screen, check Image Freeze.
3. To unfreeze the screen, select any button on the keypad or remote control.
4. Select Yes.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
TM
—Adjusts the contrast ratio depending on the contents by minimizing
Adjusting the image settings
43