Christie HS 2K Series User Manual page 14

Mandatory action
Consult the service manual.
Disconnect all power sources before performing maintenance or service procedures.
Electrical labels
Indicates the presence of an earth ground.
Laser labels
Christie Digital Systems Canada Inc.
809 Wellington Street North
Kitchener, ON N2G 4Y7
Canada
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number XXXXXX
effective XXXXXX
U.S.A Only
Additional safety hazard
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
This projector has been classified as Class 1 Laser Product-Risk Group 2
according to the IEC 60825-1:2014 and IEC 62471- 5:2015 standard.
Indicates a light hazard. Do not look directly into the lens. The extreme
high brightness can cause permanent eye damage.
Class 1 Laser Product-Risk Group 2 according to Class 1 IEC 60825-
1:2014 and IEC 62471-5:2015.
Mount above the heads of children. When within 1 m of the product, avoid
eye exposure to avoid temporary or permanent eye damage.
DWU23-HS and DWU23A-HS may become RG3 when an interchangeable
lens with throw ratio greater from 1.5-2.0:1 is installed.
DWU19-HS, DWU19A-HS, DWU15-HS, DWU15A-HS may become RG3
when an interchangeable lens with throw ratio greater from 2.0-4.0:1 is
installed.
This product is in conformity with performance standards for laser
products under 21 CFR 1040, except with respect to those
characteristics authorized by Variance Number 2016-V-1838 effective
on December 4, 2018.
Do not look directly into the lens. The extremely high brightness can cause
permanent eye damage.
Introduction
14