Adjusting The Light Power; Calibrating The Light Sensor - Christie HS Series User Manual

Adjusting the light power

Set the value of the laser diode power. The minimum setting of the light power is 30% brightness
and color setting, and the maximum is 100% brightness and color setting.
1. Select Menu > Light Source > Constant Power.
2. Adjust the slider by arrow keys or press ENTER to input the value you selected.
3. After inputting the value, press ENTER to apply.

Calibrating the light sensor

Light brightness decays naturally over time, so use this system to maintain the correct color point.
Set the time for light calibration.
1. Select Menu > Light Source > Light Sensor Calibration.
2. Select most suited time for doing the light sensor calibration:
• Default—Process light calibration at the cooling stage.
• Manual—Select to perform light calibration manually.
3. To confirm the selection, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Configuring light settings
61