Setting The Wall Color Automatically; Balancing The Image Color Automatically - Christie HS 2K Series User Manual

• Auto focus option is disabled and grayed out if the picture mode is set to 3D or 2D High Speed with
the current source or change to no source status.
(The camera does not support 1x color wheel speed).
• Auto focus option is also disabled and grayed out if the camera is not detected or lens lock option
is enabled.

Setting the wall color automatically

Set the wall color automatically so the projector can enhance the color performance customized for
the specific wall.
1. Select Menu > Image Settings > Auto Image Settings > Auto Wall Color.
2. Select ENTER.
• Auto wall color option is disabled and grayed out if the picture mode is set to 3D or 2D High Speed
with the current source or change to no source status. (The camera does not support 1x color
wheel speed).
• Auto wall color option is also disabled and grayed out if the camera is not detected.

Balancing the image color automatically

Balance the image color automatically with auto color uniformity.
1. Select Menu > Image Settings > Auto Image Settings > Auto Color Uniformity.
2. Select appropriate option for image color uniformity:
• Enable—Enables or disables the auto color uniformity function.
• Calibration—Starts adjusting the image color.
• Target Selection—Selects a calibration target.
• Reset—Restores factory settings.
3. Select ENTER.
• Image color calibration option is disabled and grayed out if the auto color uniformity option is
disabled/unchecked and the picture mode is set to 3D or 2D High Speed with the current source or
change to no source status. (The camera does not support 1x color wheel speed).
• Target selection and reset options are disabled and grayed out if the auto color uniformity option is
disabled/unchecked.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
47