Table of Contents
Advertisement
Connecting the unit
6
Connecting the power optimizing system
Requirement
30
6.3
Connecting the power optimizing system
The unit can be connected to a power optimizing system. The line length in
the unit corresponds to the length of the electric power cable.
➢ Unit disconnected from the electric mains
➢ Left side panel removed
a) Pull the connection cable into the unit through the opening next to the
entry for the electric power cable.
b) Bring the connection cable to the connection terminals.
c) Attach the connection cable in accordance with the terminal diagram.
d) Secure the connection cable with cable ties.
e) Enter the power optimizing system in the basic settings.
6.4
Basic settings
FlexFusion Gold control panel
On Off
a
button
Select
b
knob
c Center display
d Right display
e Right knob
By entering the password "2100", the basic settings for the installation can
be displayed and changed.
f "START STOP" button
g "STEP" button
h Left knob
i Left display
Setting
j
menu
Advertisement
Table of Contents
