Communications Setting Level (Lvl 1); Moving To Communications Setting Level - Omron K7DD User Manual

6-7

Communications Setting Level (LVL 1)

The Communications Setting Level is a level where you set the
parameters required for serial communications (Modbus RTU)
between the K7DD and external devices.
6-7-1

Moving to Communications Setting Level

1.
Pressing the Level Key (O)
on the Monitoring Level or
Adjustment Level for
3 seconds or more moves
you to the Initial Setting
Level.
2.
Pressing the Level Key (O)
on the Initial Setting Level
(for less than 1 second)
moves you to the
Communications Setting
Level.
•
Once the Communications Setting Level is entered, 1 is
displayed on the "LVL display."
•
To return to the Monitoring Level, press the Level Key (O) for
1 second or more.
You are moved to the Monitoring Level after the software reset.
Power Line Data Generator User's Manual (N233)
Power ON
O Less than 1 s
Adjustment Level Monitoring Level
O
Less than 1 s
Under Measurement Operation
6 Using K7DD Parameters
Communications
Setting Level (lvl1)
bps1
Baud Rate 1
M
pty1
Parity 1
M
Send Wait
swt1
Time 1
M
bps2
Baud Rate 2
M
pty2
Parity 2
M
Send Wait
swt2
Time 2
M
O
At least
3 s
Initial Setting Level
O
O
At least
Less than 1 s
1 s
Communications
Setting Level
Measurement Stop
11%2
bps1
1
At least
O
14!4
1 second
rms
6
O
Less
than 1 s
6 - 23