Support Tool Functions - Omron K7DD User Manual

5 Support Tool Function
5-1

Support Tool Functions

The functions of the K7DD Support Tool are given in the following table.
Function name
All feature measurement
and trigger measurement
simulation
Abnormal data registration The Support Tool allows you to select abnormal data to register from
Feature selection
support/Alarm threshold
setting support
Digital Maintenance Log
Arrival prediction
5 - 2
The K7DD can monitor 9 types of feature values on its display.
In the Support Tool, all 142 types of feature values can be monitored. In
addition, you can set the measurement timing while observing the
waveform in trigger simulations.
among the following:
• Device status data [Error]...Data measured by actually allowing an error
to occur
• Application configuration file...Abnormal data validated by OMRON
beforehand
• Measurement value stored in the K7DD...Data of the maximum and
minimum values of each feature recorded in the K7DD monitoring
operation
This function automatically selects feature values effective for monitoring
based on both normal and abnormal data, and also calculates thresholds
at the same time.
With this function, you can record the progress of each abnormality and
the change rate of the feature values in the current device condition, for
each of the pre-registered abnormal device conditions.
This function calculates the progress of an abnormality from the condition
diagnosis results and helps predict when the error will reach the alarm
level. This will assist the maintenance planning of the device.
Description
Power Line Data Generator User's Manual (N233)
Ref.
-5-1
-5-2
-5-3
-5-4
-5-5