Omron K7DD User Manual page 101

I
rms
R.M.S. Current
This is the R.M.S. current of measured signals.
The monitoring range varies depending on the current input range.
I
fnd
Current Fundamental Amplitude
This is the current fundamental amplitude of measured signals.
The monitoring range varies depending on the current input range.
I
thd
Current Total Harmonic Distortion
This is the current total harmonic distortion of measured signals.
Power Line Data Generator User's Manual (N233)
Setting-related page
4-2 Feature Measurement (P. 4-3)
4-3 Simplified Threshold Settings (P. 4-4)
Setting-related page
4-2 Feature Measurement (P. 4-3)
4-3 Simplified Threshold Settings (P. 4-4)
Setting-related page
4-2 Feature Measurement (P. 4-3)
6 Using K7DD Parameters
Range Monitoring range
5 A 0.000 to 5.500 (A)
25 A 0.0 to 27.5 (A)
100 A 0.0 to 110.0 (A)
200 A 0.0 to 220.0 (A)
400 A 0.0 to 440.0 (A)
Range Monitoring range
5 A 0.000 to 7.779 (A)
25 A 0.0 to 38.9 (A)
100 A 0.0 to 155.6 (A)
200 A 0.0 to 311.2 (A)
400 A 0.0 to 622.3 (A)
Range Monitoring range
--- 0.0 to 100.0 (%)
6
6 - 11