Commands And Responses (Compoway/F Communications); Setting Data Read (Compoway/F Communications) - Omron K3HB-PPB Technical Communications User's Manual

Commands and Responses (CompoWay/F Communications)

1-9 Commands and Responses (CompoWay/F
Communications)
1-9-1 Monitor Value Read (CompoWay/F Communications)
Command
Response
1-9-2

Setting Data Read (CompoWay/F Communications)

Command
The K3HB provides a set of applied commands that make use of variable area
read/write commands, operation commands, and other services provided by
the CompoWay/F communications protocol.
K3HB applied commands are explained below.
Variable
MRC SRC type Address
"01" "01"
Variable type
"C0" "0000"
"0001"
"0002"
"0003"
"0004"
This command is used to read the PV, status, and other monitor values. The
number of elements can be set from 0002 to 0019 to allow reading of monitor
values in contiguous addresses.
MRC SRC Response code
"01" "01" "0000"
Response codes: The above indicates a normal end. For the response codes,
see 1-5 Reading the Variable Area (page 1-9).
Variable
MRC SRC type Address
"01" "01"
Variable type
"C1" "0000" to "0004"
"C2"
"0000" to "0027"
"C4"
"C5"
"C6"
"C7"
"C8"
"C9"
"CA"
"CB"
This command is used to read setting data. The number of elements can be
set from 0002 to 0019 to allow successive reading of 2 to 25 items of setting
data in contiguous addresses.
Bit Number of
position elements
"00" "0001"
Address Monitor value (data name)
Version
Status
Measurement value
Maximum value
Minimum value
Data
Monitor value
Bit Number of
position elements
"00" "0001"
Address Setting data (explanation)
Setting data of setting area 0
Protect level
RUN level
Setting data of setting area 1
Initial setting level
Input adjustment level
Display adjustment level
Scaling level
Comparison setting
Linear output setting level
Communications setting level
Advanced function setting level
Section 1-9
1-13