Omron K7DD User Manual page 32

1 Overview
Symbol Name
Alarm output
indicator
(C)
Status display
(D)
Level display
(E)
Parameter
(F)
display
 Operation Keys and Switch
Symbol
(A) Alarm Latch Cancel Key
(B) Normal Data Acquisition Key
(C) Abnormal Data Acquisition Key
(D) Level Key
Mode Key
(E)
(F) Channel Key
(G) Down Key
(H) Up Key
(I) Shift Key
(J) Unit Number Setting Switch
*1. Specifying unit number 00 enables broadcasting.
1 - 8
Indicates the alarm judgment results in three colors.
Green: Normal
Yellow: A warning alarm has occurred.
Red: A critical alarm has occurred.
It will turn red also if any other fatal failure occurs.
[INTL]: Collecting abnormal data (Normal data has been acquired)
[SCCS]: Valid feature detected.
[VOLT]: Voltage Value Out-of-Range Error has occurred (updated even during hold).
[CRNT]: Current Value Out-of-Range Error has occurred (updated even during hold).
[FREQ]: Frequency Out-of-Range Error has occurred (updated even during hold).
[HOLD]: Measured value is held at the previous value while waiting for trigger.
Displays the current level.
None:Shows that the Unit is on the Monitoring Level.
Shows that the Unit is on the Initial Setting Level.
0:
Shows that the Unit is on the Communications Setting Level.
1:
Shows that the Unit is on the Adjustment Level.
a:
Displays parameters (feature values).
(A) (B) (C)
(J)
Name
Releases the alarm latch.
Acquires normal data and then starts the acquisition of error data.
Completes the acquisition of error data.
Selects the setting level.
Switches setting parameter displays, on the setting level that allows you to change
the parameter. In the Monitoring Level, it switches the displayed measurement
values.
Switches the phase or axis of the displayed feature value.
Decreases the set value for the displayed parameter.
Increases the set value for the displayed parameter.
Used for digit shift in the set value of the displayed parameter.
Sets the unit number. The setting range is from 01 to 99. *1
Function
(D) (E) (F)
(I) (H) (G)
Function
Power Line Data Generator User's Manual (N233)