Omron K7DD User Manual page 102

6 Using K7DD Parameters
P
act
Active Power
This is the active power of measured signals.
The monitoring range varies depending on the current input range.
If this parameter shows a negative value, the wiring may be
wrong. Refer to Wiring Example of 3P3W2M Connection
(3-phase, 3-wire, 2-watt Meter Method) (P.2-7), Wiring Example of
3P4W Connection (P.2-8) in
Unit Only for details.
pf
Power Factor
This is the power factor of measured signals.
freq
Power Frequency
This is the power frequency of measured signals.
6 - 12
2-2 Configuration with the K7DD
Setting-related page
4-2 Feature Measurement (P. 4-3)
4-3 Simplified Threshold Settings (P. 4-4)
Setting-related page
4-2 Feature Measurement (P. 4-3)
Setting-related page
4-2 Feature Measurement (P. 4-3)
Power Line Data Generator User's Manual (N233)
Monitoring
Range
range
5A current, -10.890 to 10.890
All voltages (kW)
Current other -871.2 to 871.2
than 5A, (kW)
All voltages
Range Monitoring range
--- -1.00 to 1.00 (-)
Range Monitoring range
--- 0.0 to 250.0 (Hz)