pf .[
Power Factor Critical Threshold
Set the alarm threshold (critical) for the power factor of the
measurement target.
The alarm will be turned ON if the power factor exceeds this
threshold (critical).
pf .{
Power Factor Warning Threshold
Set the alarm threshold (warning) for the power factor of the
measurement target.
The alarm will be turned ON if the power factor exceeds this
threshold (warning).
freq.[
Power Frequency Critical Threshold
Set the alarm threshold (critical) for the power frequency of the
measurement target.
The alarm will be turned ON if the power frequency exceeds this
threshold (critical).
freq.{
Power Frequency Warning Threshold
Set the alarm threshold (warning) for the power frequency of the
measurement target.
The alarm will be turned ON if the power frequency exceeds this
threshold (warning).
Power Line Data Generator User's Manual (N233)
Setting-related page
4-2 Feature Measurement (P. 4-3)
Setting-related page
4-2 Feature Measurement (P. 4-3)
Setting-related page
4-2 Feature Measurement (P. 4-3)
Setting-related page
4-2 Feature Measurement (P. 4-3)
6 Using K7DD Parameters
Valid setting
Range
range
---
-1.00 to 1.00 (-)
Valid setting
Range
range
---
-1.00 to 1.00 (-)
Valid setting
Range
range
All
0.0 to 250.0 (Hz)
Valid setting
Range
range
All
0.0 to 250.0 (Hz)
6
6 - 19