Using Ensuite Functions And Other Afbs; Working With Archives And Logs - Honeywell enCore Series Manual

8

8.5 Using enSuite functions and other AFBs

In normal operation, the device will operate autonomously. Nevertheless, there are
situations which require contact to be established with the device. This may be the
case, for example, if you wish to view or check the results live or export and archive
data from the device memory before they are overwritten. The use of other AFBs is
also a reason to get in contact with the device.
8.5.1

Working with archives and logs

Individual archives can be created via the parameterization in the
AFB User archive. Further information see
(p. 175)
Three archives, used as logs, are always available, "Audit trail (system)", "Audit trail
(fiscal) " and " Logbook ". Whenever changes occur or events come and go, this
information is written into one of them and stored as a history. The archives takes
the form of a ring buffer with 1000 data records.
The header contains a timestamp with the precise calendar time at which the
l
entry was generated and an ascending ordinal (sequence) number for the log
entry.
The text body contains the text with information about the reason the entry
l
was generated. This text depends on the cause and the settings in enSuite. It
starts with the name of the SFB/AFB which caused the entry.
The Logbook
documents / saves events and protocol the device operation in this way. All the
relevant data, like logins, logouts and password changes, new set of parameters,
can be viewed in these archives. The archive content remains available in the event
of a power failure or software update. When the logbook is full, the next entry will
overwrite the oldest data record. The user cannot delete the entries.
The Audit trail
This protocol archive is part of the basic system and exists in all enCore device
types. All the data in the audit trail is also saved in the log which means that the en-
tire recorded history is visible in the latter. A distinction is made between "System
/General" and "Fiscal". The Fiscal audit trail is primarily relevant for billing purposes.
The terms "official", "fiscal" and "legal metrology" are used synonymously.
GasLab Q2
Configuration and analysis software enSuite
User Manual (N )
enSuite online help
➪
239 of 315