Honeywell enCore Series Manual page 212

8
Security switch
l
In case the security switch is open, the <user name> is sufficient. This mode
is intended for special cases only, e.g. it simplifies the maintenance op-
erations and commissioning of the device since the password is not re-
quired.
Make sure that this mode complies with the security guidelines in your com-
pany.
For both modes, the user can only perform the changes and actions at the
devices, to which the associated user profile is authorized.
GasLab Q2
Configuration and analysis software enSuite
User Manual (N ) 212 of 315