Honeywell enCore Series Manual page 204

8
Add a new user (Refer also to
1. In offline parameterization open the required user profile in branch
‌ < Profile name>.e.g.,
2. Click the Add symbol
3. Enter a permissible user name into the Create user dialog. e.g.,PSchmidt. As
soon as your entry is permissible, enSuite will activate the [OK] button.
4. Confirm your entry with [OK].The user is created with the login details <User
name> and an empty password.
5. Log on to the enCore device and assign a secure password.
Delete a user( <admin1> and <su1> through <su5> cant be deleted)
1. In offline parameterization open the required user profile in branch
‌ < Profile name>.e.g.,
2. Mark the required name in the list and click the remove symbol
The user will be removed from the list without confirmation.
Change the name of a user (Refer also to
1. In offline parameterization open the required user profile in branch
‌ < Profile name>.e.g.,
2. Mark the required name in the list and click the Edit symbol
dialog, a warning will appear that if you change the name the associated user
password will be deleted.
3. In the User name field, enter a permissible user name. Soon as your entry is per-
missible, enSuite will activate the [OK] button. .
4. Confirm the name with [OK]. The changed name is displayed in the list. The old
password is deleted.
5. Log on to the enCore device and assign a secure password.
Managing access rights ( administrator only )
Access rights determine which parameters or system settings a user may or may
not change on the device. The access rights are managed exclusively by the ad-
ministrator in the expert mode.
Rights are assigned per user profile. In addition to this, changes to the device are
protected by the following security settings:
Protection of the security switch
l
Changes which are under the protection of the security switch in addition to a
l
user profile can only be transferred to the device or changed on the device
when the security switch is open. Country- specific regulations may specify
that only an authorized group of people is permitted to open and close the
security switch. This protection is the highest security setting on the device.
GasLab Q2
Configuration and analysis software enSuite
Change password
➪
User profile 1 Tab User list lists all users of this profile .
User profile 1 Tab User list lists all users of this profile.
Change password
➪
User profile 1 Tab User list lists all users of this profile
(at a parameter and system level)
User Manual (N )
(p. 138))
.
(p. 138) )
. In the Edit user
Users –
Users –
Users –
204 of 315