Table of Contents
Advertisement
7
7.3.3
Error List – Main display (accept / quit error
messages)
The device manages the warning and alarm messages in the error list (located on
Home display) and reports them in the logbook. Which messages appear, depends
on the parameterization of the device.
If the status LED is lit or flashing in red or yellow, there are entries
in the error list. The list can be opened by clicking on this symbol in
the home display
The figure below shows an example of the error list and explains the display in de-
tail.
In general:
• The error list is sorted in chronological order based on the time at which each the
message was received, with the latest message being displayed first.
• If it contains more messages than can be shown on one screen, the scroll bar ap-
pears in the right margin.
• Using the Filter drop-down list, this full list can be filtered so as, for example, to
view all the messages for one stream.
GasLab Q2
GasLab Q2 operation panel and operation
.
Fig. 7-18: Error list Main display
User Manual (N )
125 of 315
Advertisement
Table of Contents
Troubleshooting
