The Middle Of The Bottom Status Line - Honeywell enCore Series Manual

7
You can select this the entries using the superimposition keys. To confirm or ex-
ecute the selection with a blue background e.g. "Serial number" press the con-
firmation arrow box on the device in the center of the bottom line..
If a display contains more rows than can be displayed at once, a scroll bar is dis-
played. A small yellow diamond on the right-hand edge indicates your position in
the content. Use the superimposition keys to scroll.
You can also use the superimposition keys to jump to the next selectable item,
even if it is not in the visible section of the display.
7.2.4

The middle of the bottom status line

Additional information icons are displayed contextually in the middle of
the bottom row. It is possible that not all or none are displayed.
Fig. 7-5: Possible icons in the middle of the status line of displays
For fiscal measurements, settings relevant for approval must be protected. For this
purpose, conductor connections must be made inside the device via the security
switch (SSW). If these are missing, this symbol
which then appears in every display. In non-fiscal operation, the connections can
remain open. Since the housing must be opened to operate the security switch
(SSW), special rules apply, see
(p. 96). You can also have a seal affixed to the switch its selve to verify unauthorized
access. Contact Honeywell if necessary.
If the symbol is shown, somebody has logged in and is working with the device.
Normally you are the logged in user, if not you should not carry out any further activ-
ities, so as not to disturb the work of the user who is logged in. If several people ac-
cess the device, mutual agreement is always required.
(Further information on this is provided in section
(p. 115)
These symbols provide information about the visualization
settings and input conditions on device displays or the remote operation panel. The
following table gives an overview:
GasLab Q2
GasLab Q2 operation panel and operation
6.1.4 The hardware parameter guard (SSW)
➪
➪
User Manual (N )
(open padlock) is displayed,
7.3 Displays and functions
110 of 315