Menu Navigation; Data Entry; Table 5: Three-Button Option Functions - Honeywell SmartLine RMA800 User Manual

Physical
Button

Left

Center
↵
Right
4.3

Menu Navigation

The user must press
PV display screen, select <EXIT>.
Use the  and  buttons to scroll through the list of menu items. Press the
item for data entry or activation. When an item is selected for data entry or activation, the cursor will
call up a pop-up to allow editing of the value. No action is taken against a menu item until the
button is pressed.
If a user presses the
10 seconds or the Remote Indicator firmware will assume that the user wants to abort the operation
or has walked away from the Remote Indicator. After 10 seconds with no action, the data entry will
time out and the original value of the parameter will be preserved.
4.4

Data Entry

Data entry is performed from left to right. Select a character / digit by pressing  or  buttons, and
↵
then press to advance to the next character position to the right. Select the cross-hatch character
▒
to terminate the entry or if the final character is already a space character, just press
All numeric entries are clamped at the low or high limit if needed. You can determine the low and
high limit for a parameter by selecting either the ▲ or ▼ character while the cursor is positioned
over the left-most digit and press
Page 16 Foundation Fieldbus RMA803 Remote Indicator User's Guide

Table 5: Three-Button Option Functions

Advanced
Display
Increment
Move cursor Up
Decrement
Move cursor Down
Enter
↵
button to call up the Main Menu. To exit the Main Menu and return to the
↵
button to begin a data entry operation, they must press another button within
↵
button. The Display will show the selected limit.
Action
Scroll to previous menu item in an active
list.
Scroll through alphanumeric list to
desired character (ex. for entering Tag
names or numeric values)
Scroll to next menu item in an active list.
Scroll through alphanumeric list to
desired character (ex. for entering Tag
names or numeric values)
Call up the Main Menu.
Call up a lower-level menu.
Select an item for data entry.
Confirm a data entry operation
Activate the service associated with a
selected menu item.
↵
button to select an
↵
↵
again.
Revision 4