Display Q2 Sensor Values - Honeywell enCore Series Manual

7

7.3.10 Display Q2 sensor values

A complete list of all sensor values is displayed in the following table:
Sensor signal Use/Meaning
UIR 1- UIR 4 For internal calculations only
Pressure (ambient + measuring unit [ap-
PI
prox. 160 mbar])
TSB Temperature of sensor block
UW11 - UW22 For internal calculations only
PU Ambient pressure (internal monitoring)
Circuit board pressure (internal moni-
TP
toring)
PW1, PW2 For internal calculations only
TM1, TM2 For internal calculations only
TB1, TB2
Housing temperature (internal moni-
TH1
toring)
GasLab Q2
GasLab Q2 operation panel and operation
Behind this symbol lies the list of sensor values.
As a rule, this display is only used for service purposes
and to isolate faults.
Fig. 7-35: Q2 sensor values display
User Manual (N )
Sensor value range
Several 100 mV
Ambient-dependent
approx. 70°C ≙158°F ≙343K
Several 100 mV
Ambient-dependent
Ambient-dependent
Several mW
Around 100°C
Around 68°C
Ambient-dependent
146 of 315