Table of Contents
Advertisement
8
8.6 The Remote operation panel actions
The so-called remote operation panel refers to a function that enables the remote
control of enCore devices with your service computer. The remote operation panel
is a copy of the local operation panel and is displayed in enSuite. The remote ac-
cess can be done via Ethernet or USB connection.
Because the remote operation panel behaves like a real display on most enCore
devices, opening, closing, or connecting / disconnecting the instrument does not
change the login status.
8.6.1
Activate / deactivate remote operation panel
As soon as you are connected to a device (see
PC
(p. 177)), the entries in the lower left corner of the enSuite interface are ac-
tivated. If you select the entry "Remote operation panel" there, a graphical control
panel appears in the middle of the enSuite interface. The shown display cor-
responds to the front of the device.
By mouse clicks in the areas of the 7 touch fields (see
operation panel
(p. 106), the same operation as on the device is possible. The dis-
plays of the screen and the LEDs are now synchronous to the device. At the same
time, the physical local display is assigned a lock screen and the local input is de-
activated.
Fig. 8-50: View of the remote operation panel via enSuite
Tip: Detach the window from the enSuite frame see
(p. 173)
and have the remote operation panel displayed enlarged, which
makes it easier to use.
GasLab Q2
Configuration and analysis software enSuite
Connect enCore device to Service
➪
User Manual (N )
7.2 Screen display on the
➪
Starting enSuite
➪
244 of 315
Advertisement
Table of Contents
Troubleshooting
