Honeywell enCore Series Manual page 301

14
14 Glossary
A
Administrator
Administrator is a person with unrestricted access to the device and
res¬ponsible for setting and transferring user management to the
device. The Administrator should therefore have the appropriate
equipment knowledge e.g. by participating in a training course. The
station operator usually takes on this task.
Alarm
Error which jeopardizes the correctness of the results. Generated, for
example, if a measurement is outside the defined measuring range.
The start and end of an alarm are registered with time stamps in the
associated logbook / error list.
Analysis
is the operating mode in which the device undertakes systematic ana-
lyses and is therefore the normal operating state.
Approval file
is an enSuite file which automatically defines which parameters
should be especially protected. It contains approvals for specific coun-
tries or standard-ized settings and relates to all relevant AFBs. An
approval file must be used for fiscal purposes, otherwise its use is
optional.
Audit trail
is a two-part log archive (parameter audit trail) which enables the
user to conduct changes relevant to billing without opening the SSW.
These changes are monitored and documented in the fiscal section.
If the SSW is opened, data are only included in the general section.
Authorizied metrology expert
or Fiscal verification officer ia a person who has the ability and is
authorized, because of his or her technical training, knowledge and
experience, to execute fiscally protected tasks in gas systems within
the scope of legal metrology. A metrology expert is trained to work
with fiscally protected devices and systems and is acquainted with
the relevant standards and regulations that apply in specific coun-
tries.
Automation
The operating mode in which the device undertakes systematic ana-
lyses and is therefore the normal operating state.
GasLab Q2 User Manual (N )
Glossary
301 of 315