Table of Contents
Advertisement
GREEN CLASS METER
KWH METER FEATURES
& FUNCTIONS
KWh Meter Display Features
NORMAL MODE (KWH READING)
The Class 200 kWh meter display requires no multiplier and
shows kilowatt-hours consumed. See section 6.2 for informa-
tion on calculating cost based on kWh usage.
KW LOAD MODE (CURRENT LOAD IN KW)
Pressing the "UP" button on the meter display board will
switch the display to the Load mode and will show the
present load in kW (kilowatts). (Allow 6 seconds for correct
reading to stabilize.) This feature is useful to the consumer
as it shows the actual load on the meter and can be valuable
in showing the effects of large loads-such as air conditioning,
electric hot water heaters, and electrical appliances on power
consumption. Pressing the "UP" button again returns the
meter display to normal mode.
TEST MODE
Pressing the "CPU" button on the meter display board will
cycle the display through the test mode. The two screens
below will be seen.
62-0340-01
The first screen activates all the digits and icons on the
display. This is to verify that all segments on the display are
functional.
The second screen will show the amp rating of the meter.
The first digit (on the left side of the dash) will always be zero
on the kWh meter. The four digits on the right side of the dash
indicate the amp rating.
Upon completion of the cycling, the meter will return to the
normal display mode. When the meter is first energized it will
automatically cycle through the test screens.
Green Meter Display Functions
==Normal Mode==
The Green Class Meter has a cyclic display consisting of six
data screens. The data shown on each screen is described
below. The test mode will also be explained in this chapter.
Screen 1: Total kilowatt-hours consumed
The kWh display shows the total amount of kilowatt-hours
consumed. No multiplier is required for this reading.
Screen 2: Total cost to date
The display shows the total cost for the kWh consumed to
date. Entering the kWh charge is explained in Chapter 8.
Screen 3: Present load in kilowatts
The kW display shows the present load in kilowatts. No multi-
plier is required for this reading.
12
Advertisement
Table of Contents
