Safety Information About Gases And Pressures - Honeywell enCore Series Manual

2
2.5 Safety information about gases and pres-
sures
//Cette page est répétée en français. // This page is repeated in French. //
The measurement device requires various gases for operation and measurement
with different hazard potentials. Supply all gases into the device and out again via
fixed lines. Follow the hints in section
device (p. 65)
DANGER
Explosion and poisoning
Gases can form an explosive mixture with air and be toxic. Damage to
health to property and to environment can be the consequences of in-
correct handling. Always ensure adequate ventilation when working on
gas lines and protect against gases containing aggressive or toxic
components. Observe the explosion protection regulations.
PROHIBITION
Connect gases which are potentially flammable or explosive
l
without the presence of oxygen (for example, C
the device.
supply the device with any gas which contains an amount of oxygen
l
that could lead into a flammable or explosive mixture.
pressure above 0.3 MPag
l
(even in the event of a fault)
excess pressure at the outlet ports (also in case of error)
l
GasLab Q2
Safety information (EN-US-FRA)
5.4 Fluidic installation of the measuring
➪
3 barg 43.51psig at the input ports
≙ ≙
User Manual (N )
H acetylene) to
2 2
27 of 315