Table of Contents
Advertisement
8
Login prompt and login status
For working on protected settings, a login prompt will automatically appear when
you start the action. To log in, you will require a user name and password which the
system operator, acting as the administrator, or the super user of the profile will
have prepared for you.
Please request these data.
If you have the required authorization and the position of the calibration switch
(SSW) allows editing, you can make the changes after logging in.
Check your login status
Click on the topmost folder in the parameter tree, select the tab as shown.
If a login is requited or possible e.g. for online parametrization you have the option
to use "Login" button .
Log out by disconnecting the device or closing the function e.g. the online para-
meterization window.
GasLab Q2
Configuration and analysis software enSuite
Fig. 8-25: Login dialog window
Fig. 8-26: Online parameterization login and logout
User Manual (N )
215 of 315
Advertisement
Table of Contents
Troubleshooting
