Honeywell enCore Series Manual page 278

10
10.4.2 Tips for sealing the leak
When leaks are detected, they need to be sealed. You have a few options to do this..
Tighten the connections.
l
In the course of time, connections may have loosened slightly. By retightening
them, they can be resealed. For small sizes, be careful not to block the flow of
the gas with this measure. Do not overtighten the thread.
Replace the seals.
l
You will need the appropriate replacement seals. Switch off the gas supply for
this purpose, observe the explosion protection rules and the assembly in-
structions in the following section.
GasLab Q2
Maintenance, cleaning and repair
User Manual (N ) 278 of 315