Configuring Ptz Connection Settings; Configuring Ptz Functions; Configuring Ptz Presets - Honeywell HEN04112 User Manual

54 | Performance Series Full PoE Network Video Recorder User Guide

Configuring PTZ Connection Settings

Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
To configure the PTZ connection settings
1.
2.
3.
4.

Configuring PTZ Functions

You can configure presets, tours, patterns, and borders using the PTZ control panel.

Configuring PTZ Presets

You can program preset positions for the PTZ camera. For example, you can point the camera
at a specific location, such as a doorway, when an alarm event occurs.
www.honeywell.com/security
Go to Main Menu > SETTING > SYSTEM.
In the left navigation pane, click PAN/TILT/ZOOM.
Figure 3-7 System Setting - PTZ
Configure the following settings:
• Channel Select the channel (camera) for which you want to configure PTZ
settings.
• PTZ Type Select Remote for the PTZ type. A remotely connected IP camera is
connected through the network.
Click Apply, and then click Save to save your settings and exit.