Table of Contents
Advertisement
AVAILABLE OPTIONS :
NCX can be delivered with one of the following
options
• NCX 200 : 2 mono outputs
• NCX 400 : 4 balanced mono outputs
• NCX 040 : 4 balanced mono inputs (with mic/line
level selection)
• NCX 220 : 2 mono inputs (with mic/line level
selection) and 2 mono outputs
OVERVIEW
• Independent device exchanging digital sound
through Ethernet 803.3 network
• 10 BASE-T Ethernet interface.
• 2 or 4 analog mono outputs and 1 stereo
headphone output (depending on option).
• 4 analog mono inputs (depending on option).
• 7 general purpose inputs/outputs.
• 2 general purpose RS232 links.
SOFTWARE
REQUIREMENTS
• V99.2 np SDK or higher (no PCX cards managed)
• V5.40 np SDK or higher (PCX cards also
managed)
HARDWARE
INSTALLATION
• Install the NCX box in the suitable place,
• Connect the audio input/output,
• Connect the network cable (RJ45)
• Connect the power supply to the NCX box (mini
DIN plug)
• Plug the power supply into the AC supply socket.
SOFTWARE
INSTALLATION
(np DRIVER ONLY)
No driver floppy disk is delivered with the NCX.
Please ask your supplier for an updated driver or
download it from the Digigram Web site.
Make sure that the driver has been approved by your
supplier. Your supplier's application may request
the use of a specific driver.
Please refer to the installation documentation which is
delivered with the driver. It details the installation
procedure to follow under Windows 95/98 and
Windows NT.
NCX
User's Manual
3
Advertisement
Table of Contents
