Intercom Calling - Panasonic KX-TD308 Installation Manual

Features

Intercom Calling

Description
Conditions
Programming References
Feature References
Operation References
-User Manual
Allows the extension user to call another extension user within the
system.
Extension numbers are assigned to all extensions by System
l
Programming. An extension number is programmed to be two, three, or
four digits.
Names can be given to extension numbers by System Programming.
l
An extension number and a name, if programmed, is shown on the
display PT during an intercom call.
DSS buttons permit one-touch access to an extension and provide Busy
l
Lamp Field.
l
directory on the display.
. After dialing an extension number, the user will hear one of the
following:
Confirmation tone: indicates the user can perform Voice
Calling.
Busy tone: indicates the other extension is busy.
Do Not Disturb tone: indicates the other extension has DND
assigned.
Section 4, System Programming
[ 1001 Flexible Numbering, 1st through 16th hundred extension blocks
Station Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible CO Button Assignment - DSS Button
Section 3, Features
Busy Lamp Field
DPT Features, Standard Telephone Features
Intercom Calling
Button, Direct Station Selection
Features
3-89