Table of Contents
Advertisement
System Programming
[103] Automatic Access CO Port Assignment
Description
Assigns the sequence in which CO ports will be accessed when in Automatic Line Access
mode. When a user dials the feature number for automatic line access (default=0) or presses
the L-CO button, an idle line is hunted in the programmed CO ports order.
Selection
CO port number: 1 through 3, 3 entries (max.) in desired order
Default
1234
Programming
1.
Enter 103.
Display: Auto Line Access
2.
Press NEXT.
Display example: Access:1234
3.
Enter the CO port numbers in priority from top to bottom.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new order.
4.
Press STORE.
5.
Press END.
Conditions
There is a maximum of 3 CO ports. Up to 3 CO port numbers can be entered.
Features Guide References
Line Access, Automatic
Line Access, Direct
Line Preference — Outgoing (Idle Line/No Line/ Prime Line)
68
Programming Guide
Advertisement
Table of Contents
