Konica Minolta bizhub C658 Service Manual page 1301

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
[1]
5. Reinstall the assist handle that was removed in step 3, securing it with the screw.
6. Reinstall the paper assist plate assy with a new screw (M3 X 12 mm: V116 0312 03). The screw removed in step 2 (M3 X 10 mm: V116
0310 03) cannot be used to reinstall the assy.
7. Close the upper door.
8. Perform copying/printing to check whether the no feed or the double feed occurs or not.
I ADJUSTMENT/SETTING > 20. MECHANICAL ADJUSTMENT LU-207
3. Remove the screw [1] and remove the assist handle [2].
4. Add one more paper assist plate (A03N 5604 ##) [1] to the original ones.
NOTE
▪ Adding only one paper assist plate is allowed and the total needs
to be up to four.
I-531