Display Qos-Interface Line-Rate; Display Qos-Interface Traffic-Limit - H3C S3600 Series Command Manual

Command Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510
Priority action: dscp ef
Ethernet1/0/1: line-rate
Inbound: 128 kbps
Outbound: 1024 kbps
Ethernet1/0/1:
Queue scheduling mode: strict-priority

1.1.4 display qos-interface line-rate

Syntax
display qos-interface { interface-type interface-number | unit-id } line-rate
View
Any view
Parameter
interface-type interface-number: Port index.
unit-id: Unit ID of the switch.
Description
Use the display qos-interface line-rate command to display the rate limit
configuration of a port or all the ports of a switch. If you do not specify the interface-type
interface-number argument, this command will display the rate limit configuration of all
the ports of a switch; if you specify that argument, this command will display the rate
limit configuration of a specific port.
Example
# Display the rate limit configuration of a specific port.
<H3C> display qos-interface 1 line-rate
Ethernet1/0/1: line-rate
Inbound: 128 kbps

1.1.5 display qos-interface traffic-limit

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-limit
View
Any view
1-3
Chapter 1 QoS Commands