Step 2 Set Begin Time, and End Time, and then set the Direction (vehicle movement
direction, including Approaching, Departing, and Unknown).
Step 3 Click Search to search for the plates that meet the search conditions.
Step 4 Click Export, and then select storage path to export the results to PC.
4.4.4 Alarm Output Search
Set the search conditions to search alarm output.
Make sure that all the external devices are connected with the Camera through RS-485 port.
Step 1 Select Query > Alarm Output Search.
Step 2 Set the start time and end Time.
Step 3 Click Search.
Click Export can export the search results to local.
4.5 Setting
You can configure several parameters such as ITC, camera, network, event, storage, system,
and system information.
4.5.1 ITC
You can set intelligent parameters of the Camera.
4.5.1.1 Detection
4.5.1.1.1 Snapshot
You can set snapshot rule of the Camera.
Figure 4-29 Alarm output search
30
User's Manual