Adding Camera; Configuring Recording And Capturing - Dahua Technology ITC1652 Construction Manual

Adding Camera

On the home page, select Setting > Add Camera > Add Camera.
Select and then enable the channel, enter the IP address, username and
password, and then click Save.
You can click Refresh after several seconds to check if the camera is
successfully added to the edge storage device. If it is, the camera icon will turn
orange.

Configuring Recording and Capturing

Configure recording
On the home page, select Setting > Storage > Record > Record Control.
Select a channel, select Main Stream as the Record Mode, and then click
Save.
17
Construction Guide