First Sample - Screen #4; Second Sample Screen; Sample Complete Screens; Sampling Complete - Screen #1 - Thermo Scientific PDM3700 Manual

First Sample -
Screen #4
Second Sample
Sample Complete
Screens
Sampling Complete
- Screen #1
Thermo Fisher Scientific
right side of the screen, and the previously displayed bars will move to the
left.
The First Sample - Screen #4
time and sample time for the first primary sample run ("Sample 1"). In the
First Sample - Screen #3, press the "B" button to display the First Sample -
Screen #4.
Figure 2–36. First Sample ‑ Screen #4
The First Sample - Screen #4 contains the following information:
Elapsed Time. This field contains the elapsed sample time
●
(hours:minutes) measured from the beginning of the first primary
sample run.
Program Time. This field contains the entire sample time duration or
●
cycle (hours:minutes) that was set by the user in the Start Sample
screen for the first primary sample run.
During the sampling run, the PDM3700 will run automatically until the
sample cycle ends. After 30 seconds of inactivity at the end of the sample
run, the PDM3700 will turn off its LED display. Press the "A" button to
reactivate the LED display and to bring up the Sampling Complete -
Screen #1
The Second Sample Screen displays the mass concentration, cumulative
exposure and elapsed time for the second primary sample run ("Sample 2").
Screen
This screen will display immediately after the start of a second primary
sample run. Refer to "Starting a Second Sample Run" earlier in this chapter
for more information on the Second Sample screen.
The PDM3700 displays several screens following a sample run.
Information includes cumulative exposure and other data, as well as any
status codes logged during the sample run(s).
The Sampling Complete - Screen #1
time duration and the total mass concentration (EOS) for the first primary
(Figure
(Figure 2–37).

Sample Complete Screens

2–36) displays the elapsed sample
(Figure 2–37) displays the sample
PDM3700 Instruction Manual
Basic Operation
2-23